QuickWood Product Catalog Video

Here you will find all the product that Quickwood sell in one video showing you machines and abrasives from Quickwood. For Brush Sanding Machines visit quickwood.com

Contour Sanding

Contour Sanding with the QuickWood line of machines from Hand Tools to automatic machines are something that should be looked at to save labor and save time. These machines will contour sand your parts very fast and 100% uniform compaired to hand sanding. Now look at the cost of hand sanding and compaire that to automatic sanding our a hand tool that will do it faster.

Give us a call and see how we can help you with your contour sanding.

Brush Sander

Brush Sander is what QuickWood is all about, where have the moulding brush sander and the rotary brush sander for the cabinet doors

We probably have the greatest brush sanding system out there with our replacement strips that will make the brushes reusable and you just replace the abrasives.

Check out this page for brush sanders of all kinds. Or give us 2 min and see our product video on brush sanders.




minneapolis, brush sander minneapolis, mn

Denibbing Brush Sander

Denibbing Brush Sander for moldings or for kitchen cabinet doors are what QuickWood does best. Here are some examples of machine sold world wide by QuickWood. You can find more information on Quickwood.com


The denibbing brush sander for moldings CD2-300


The denibbing brush sander for kitchen cabinet doors.


Please visit our main website for more information on these and many other denibbing brush sanders

Reversing Of Spindle On A QuickWood Machine

It is now possible to reverse the spindles on all QuickWood machine even older QuickWood machines. Reversing the spindles gives you the benefits of using 2 different grits as you sand with the QuickWood Quick-Strip System. You can use a p180 grit for your white wood sanding and a p320 grit for your sealer sanding. Its a very cheap conversion and it something most customers with an older QuickWood machine should look into as the benefits with two different grits are numerous.

White wood sanding

* Use a coarse grit to open the grain for a good stain color.

* Use a coarse grit in white wood for better edge break

* Use a coarse grit in white wood for better over all sanding

Sealer Sanding

* Use a fine grit in sealer sanding to make the sealer as smooth as possible before topcoat

* Use a fine grit in sealer sanding to avoid burn though on the edges

* Use a fine grit in sealer sanding to sand more in the profile while avoiding edge burn though.

Call the office today for a talk about making your QuickWood machine reversing.

Call our Toll Free number 1-888-880-7263

Getting The Most Out Of Your QuickWood Machine

QuickWood finishing sanding machines has been sold since the early 1990 but at the time the machines where only made to use one sandpaper and customers would frequently have to change sandpaper on the machine to do both pre sanding and sealer sanding with the same machine. In 2002 QuickWood started making brushes that could hold abrasives on both sides of the brush making the change of abrasives to do diffent kind of sanding a thing of the past.

This style of abrasive would work when the machine was build to revers the spindles a very simple fuction when the spindles where run off an frequency inverter. Even older style Pro or machines like the CD2-300 moulding sander from QuickWood would be very easy to convert over to reversing of the spindles so the double side brush could be used with 2 different grit abrasives.

Now when you want to revers a spindle with out a frequency drive or a machine that uses a mecanical inverter for the changing of the speeds of the spindles, that would be the RO series from QuickWood the conversion would take place at the motor. We know that when two wires in a 3phase motor is changed the motor will run in revers. This will change the directions of the spindles and reversing can be used for Ro models also.

Call your local QuickWood representative and see if you machine can be made to use the double sided brush so you can use the two different grit abrasive.

When using two different grit abrasives on the machine a better pre sanding and sealer sanding can be done with the correct grit. No more changing abrasives for different sanding applications.